The rubber extrusion process is alike to the plastic extrusion process, the material is forced under pressure, through a die, thus adopting the desired shape. The vulcanization process must be carried out before the rubber part or profile is usable.
Vulcanization takes place in the last step of rubber extrusion, this process helps the profiles and rubber parts to maintain their shape and acquire the necessary physical properties.
Types of rubber extrusion according to vulcanization processes
– Non-stop vulcanization extrusion: The rubber goes through a curing or vulcanizing tunnel, where the temperature is raised for vulcanization.
– Off-line vulcanization extrusion: The hot rubber is driven through the die and is then exposed to high pressure steam in order to reach the appropriate temperature for vulcanization.
Advantages of the extrusion process
– Wide variety of shapes
– Economical process
– Flexible and lightweight products
– High efficiency
Our factories can produce a wide variety of cross sections, even customized, in different materials and sizes according to the customer’s technical specifications.
Our suppliers are capable of producing custom parts from virtually any type of rubber.
– EPDM
– TPU
– Foam Rubber
– Neoprene
– Butyl rubber.
– Fluoroelastomer / FKM or Viton.
– Neoprene
– Nitrile rubber (NBR).
– Polisoprene.
– PVC
– Silicone (VMQ).
If you want to know more about the Rubber Extrusion, at SUMIPARTS we are willing to collaborate with you. We want to provide you with the best services at your reach. Get in touch with us by calling Pbx: +57 748 22 13 Cel: 313 699 13 56 or by sending an email to info@sumiparts.com. Our technical team will be ready to assist you.
English 
Español de Colombia